The cargo is loaded dry, the container is secure and the doors are closed properly. However, upon arrival, some of the cartons were damp, labels peel off, and there are traces of corrosion on the metal products.
The cause is not always a leak or water ingress from the outside. During sea transport, moisture can form inside the container itself due to temperature changes and condensation.
The risk is often underestimated, because the container looks like a closed and secure environment. In reality, the temperature of its metal walls is strongly influenced by external conditions, and part of the moisture can be introduced during loading - through the air, the goods, the pallets, packaging and reinforcing materials.
How condensation forms?
Air always contains a certain amount of water vapor. The warmer he is, the more moisture it can hold. When the temperature drops below the so-called. dew point, part of the water vapor passes into a liquid state and drops are formed.
During sea transportation, the container may be repeatedly heated and cooled. The reason for this can be the day and night temperature differences, the transition between different climatic zones, the stay of terminals and the position of the container relative to the sun, sea water and the environment.
The metal structure reacts to these changes much faster than the load. So the temperature of the walls, the air and the goods themselves may differ sufficiently, for condensation to occur.
Where does the moisture in the sealed container come from??
Moisture is not only contained in the air. Its possible sources are:
- the cargo itself, especially when it is hygroscopic or has a natural moisture content;
- wooden pallets, beams and reinforcing materials;
- cardboard and paper packaging;
- the air, remained in the container after closing;
- loading in rain or high atmospheric humidity;
- wet floor or residual moisture after washing the container;
- water penetration through damaged seals, holes or other defects.
Hygroscopic materials can absorb and release moisture depending on the temperature and humidity of the air. That's what it means, that visibly dry pallets, cartons or products may gradually release water vapor after the container is closed.
Condensation on the container and condensation on the cargo
In practice, two main manifestations of the problem are distinguished.
Condensation on internal surfaces
This phenomenon is known in English as container sweat. It arises, when the temperature of the metal walls or ceiling falls below the dew point of the air in the container.
Drops form on the metal. If their quantity increases, water may begin to drip from the ceiling onto the load. It is this visible effect that is sometimes called container rain.
Condensation directly on the load
At the so-called. cargo sweat moisture forms directly on the surface of the product. This can happen, when a relatively cold cargo comes into contact with warmer, moister air, чиято точка на оросяване е по-висока от температурата на товара.
The difference is important, защото подходящите мерки не са еднакви при всички стоки и маршрути. В определени условия вентилацията може да помогне, а в други да внесе допълнително количество влажен въздух и да увеличи риска.
Какви щети може да причини влагата?
Последиците зависят от вида на товара, продължителността на транспорта и количеството образуван конденз. Among the possible damages are:
- softening, деформация или разрушаване на картонени опаковки;
- отлепяне и повреждане на етикети;
- развитие на мухъл и неприятни миризми;
- корозия по метални изделия, parts and equipment;
- food damage, raw materials, textile, paper and wood;
- повреди по електронни компоненти и чувствително оборудване;
- нарушаване на търговския вид на стоката, дори когато самият продукт остава използваем.
При някои товари проблемът се забелязва веднага. In others, the consequences may appear later — for example, through the gradual development of corrosion or mold after unloading.
When the risk is higher?
Вероятността от кондензация се увеличава при съчетание на няколко фактора:
- значителни температурни промени по маршрута;
- преминаване между топъл и студен климат или обратно;
- продължителен морски транспорт и дълъг престой по терминали;
- goods, опаковки и палети с високо влагосъдържание;
- wet weather loading;
- insufficient or inappropriate protection of sensitive goods;
- lack of prior assessment of the route and cargo characteristics.
It is not enough to look only at the weather forecast at the start and end point. The container can pass through several climatic zones and remain for a long time at an open terminal.
How the risk can be limited?
There is no one-size-fits-all measure, which is suitable for each load. Prevention must be tailored to the type of product, the moisture content of the materials, the packaging, the route, season and duration of transport.
1. The cargo and packaging must be dry
Before loading, it must be checked whether the goods, the cartons, pallets and reinforcing materials are not damp. Enclosing wet materials in the container introduces additional moisture, which can be released during the journey.
Loading in rain should be avoided or carried out with the container and goods protected.
2. The container must be inspected
Before loading, check the roof, the walls, the floor, doors and seals. Traces of previous water penetration, open, damaged seals or a wet floor are grounds for not using the container, until his condition is assessed.
This check helps distinguish the risk of condensation from the risk of an actual leak. However, a robust and watertight container does not eliminate the possibility of internal condensation.
3. The packaging must match the sensitivity of the load
For goods, sensitive to moisture, suitable barrier films can be used, inner protective packaging, finishes and materials, which limit contact with condensed water.
Simple plastic wrap is not always enough. If there is already moisture in the package or it is not properly closed, the foil can trap moisture around the product.
4. Moisture absorbers must be properly selected
Container desiccants, also called desiccants, reduce the amount of water vapor in the air and, accordingly, the probability that it will condense.
The amount needed should not be determined arbitrarily. It depends on:
- size and type of container;
- the duration and route of the transport;
- the type and quantity of cargo;
- the moisture content of pallets and packaging;
- the free air volume;
- expected temperature and climate conditions.
Desiccants have a limited capacity. They cannot compensate for wet cargo, active water penetration or inappropriate packaging.
5. Ventilation should be used carefully
Ventilation is not a one-size-fits-all solution. It is only useful when outside air can reduce the moisture in the container, without creating condensation conditions on the colder load.
If warm and moist air is admitted to cold goods, condensation may form on it. Therefore, the ventilation solution must take into account the temperature of the cargo, the temperature and dew point of the outdoor and indoor air.
The small passive openings of the standard dry container do not constitute a humidity control system and do not guarantee condensation prevention.
6. Order also matters
When the characteristics of the load allow it, the goods must not be pressed directly against the walls and ceiling of the container. Appropriate protective materials and arrangement can limit direct contact with condensed water.
At the same time, the load must be secured against movement. Protection against moisture must not impair the safe distribution and strengthening of the load.
7. Terms can be tracked
For sensitive or high value goods, humidity indicators or temperature and relative humidity recorders can be used. They do not prevent condensation, but provide information on the conditions during transport and help in evaluating the measures taken.
Common preparation mistakes
- it is accepted, that as long as the container is not leaking, the load is protected from moisture;
- moisture in pallets and reinforcing materials is not checked;
- any amount of desiccants is used;
- the goods are tightly packed, before it is dry enough;
- ventilation is automatically assumed to be a correct solution;
- the season is not taken into account, the route and duration of the transport;
- measures are determined only after the first damage has occurred.
Prevention begins before the container is closed
After departure, the possibilities of reaction are severely limited. Therefore, the risk of condensation must be evaluated already when choosing a package, pallets, reinforcing materials, moisture absorbers and method of loading.
Condensation cannot always be completely prevented, but the likelihood of damage can be greatly limited by dry materials, upright container, suitable protective packaging and measures, tailored to the specific load and route.
The most important principle is simple: moisture must be managed before the container is closed, and not after the cargo arrives damaged.

